Tools

2" Stud Set Screw, 304 Stainless Steel, 1/4-20 Thread size, Hex Allen Wrench insert

Adjustable Bunk Bracket, Heavy Duty Aluminum, Base Dimention is 5 x 6 inch, Channel is 2 x 2 inch, for Boat trailers or any Super Heavy Duty Purpose. Holes are 9/16".

Advertise on HurricaneShutterHardware.com , a Page 1 Ranked Website with visits by mostly Homeowners. Limited Categories and Advertisers!

Awning Z Clips, made of Galvanized Steel. 1.5 x 2.5 x 1/8 thick

Slotted Bleacher Clip, 2" x 1.25 inch by 1/4" Thick, for 9.5 inch Bleacher Plank, Aluminum

Bonded Washers, Stainless Steel washers heat bonded to rubber washers to make a 2 sided dual washer for many purposes, 1/4" hole. 3 sizes.

Wood Bushing Insert Tool, Power Driver Style, 6 inch, for setting 1/4-20 Brass Wood Bushings.

Brass Wood Bushing Anchors, Slotted, 1/4-20 Inner Thread, Wood Anchor Bushing is 3/4" Long by 1/2" Diameter, choose Quantity.

D.O.T. Break Away Sign Pole Base Kits for Single Column Signs, or Sign Pole Stand Base Flanges, 4 sizes to choose

Cable Tie Wraps, Super Heavy Duty 1/16" Thick Nylon, 3 Feet Long by 3/8" Wide, Holds up to 150 pounds each, Black Only, UV Resistant,..

Combo Brass Lead Anchors, for use with any size length 1/4-20 bolt, pass thru style. Zamac Body / Brass Core. Bolt Anchor Fastener is...

Combo Drill Bit, 1/4" x 1/2" x 2", Domestic Professional Version, used to drill perfect pilot holes and counter sink for Anchors. 

Sidewalk Combination Bolts, 1/4-20 Thread Size, 1/2" - 2 1/2". They have a Flat Round Head with Beveled edges, Phillips - Slotted...

Combo Truss Bolts, 1/4-20 Thread Size, Choose Length. They have a Round Pan Head, combination Phillips - Slotted...

D.O.T. Approved Aluminum Shims size #2, Horseshoe style, 2 inch Square by 1/32 thick. FDOT approved Flat shim for Signs and other General Purpose uses.

D.O.T. Approved Flat Metal Shims size No.3, Horseshoe style, 3 1/8 inch Square by 1/32 thick. FDOT approved shim for General Purpose use. Aluminum.

PADDLE SWITCHES for roll shutters, Single Pole, Maintained or Momentary Style. 15A. Designer PADDLE SWITCHES.

DOT Approved U-Bolts, sizes 2 - 6 inch, Galvanized Steel, 7/16" Diameter Round, 1 Pair, includes Lock Washers and Nuts.

End Retention Screws for 55mm Slat Lock Guide, HV Hi Velocity, Coated Stainless Steel, 10 x 2 1/2" Phillips Head, choose Total Pieces desired.

Socket Power Bit Extension Driver, 1/4 x 6 Inches, Hex, Magnetic, Pro Quality, Made in the USA.

Socket Power Bit Extension Driver, 3/8 x 6 Inches, Hex, Magnetic, Pro Quality, Made in the USA.

Socket Power Bit Extension Driver, 5/16 x 6 Inches, Hex, Magnetic, Pro Quality, Made in the USA.

EZ Wall Mounting Clip, Aluminum, Self Mating 6 foot pieces with a 3/8 inch Holding depth, for holding Signs, Artwork, cabinets. No Holes, you drill and cut this item to size

Interlocking Wall Mounting Clips, Raceway Tabs for Signs, Art, Cabinets,.. Max Load Per tab is 160 lbs Horizontal, max Vertical is 220 lbs..

Limit Switch Tool, 7-1/2" Plastic, used for setting the white and red limit switches on 35mm to 59mm Tubular Motors.

Nitrile Palm Coated HPPE Level 5 Cut Resistant Hand Gloves for Auto Repair, Medical, Police, and Kitchen use. Best you can get.

Panelmate Female Anchors, 4 sizes, select Total Pieces Desired. These have a 1/4-20 threaded hole, and a 5/16" Hex Driver is needed 

Panelmate Female Insert Anchors for Concrete, includes Bonded Washers, 2 sizes, choose Total Pieces desired. Needs a 5/16" Hex Driver to install. 

Panelmate Insert Driver Power Bit, for Female type Panelmate Anchors, 5/16" Hex, 3" Long hardened Steel. 

Panelmate Plus Anchors, made of 18-8 Stainless Steel, for Wood Applications

Panelmate Pro Anchors 2.25", 2 Stud Sizes, Choose total Pieces desired, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Panelmate Pro Anchors 3.25", 2 Stud Sizes, Choose total Pieces desired, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Panelmate Pro Anchors, Extra Large, 3 Sizes with 1 1/8" Stud, Made of Carbon Steel with Silver Stalguard Coating. For Concrete or Cement Block.

Panelmate Pro Male Anchors, Stainless Steel with Silver Stalguard Coating, 14 x 1 3/4", with 1/4-20 x 1/2" threaded hole. Needs a 3/8" Hex Socket to screw in.

Click this $$$ product to pay for a Custom Phone Order, or for Expedited Shipping, or...

Push In Screw Plugs, White Nylon, for Panelmate Pro Female Anchors, they Push in but need a Screwdriver to remove, can be used as an Automotive clip,.. 2 Sizes

Rapidset Tool for Lead Anchors, Professional Model, not a punch its a threaded power bit that screws the anchor to set it in place, for 1/4-20 size threads. 2 Sizes.

Screw Anchor Expander for Hollow Walls and Concrete Blocks, Made by GREENLEE, 1/4-20 Masonry, Made in USA of Hardened Alloy Steel.

Screw Protectors for Panelmate Pro Anchors, White Nylon Caps, UV Resistant, 1 1/8" Long, or use for any 1/4-20 size thread screw or bolt.

SDS TAPCON Bit Adapter, comes with the allen wrench.

Lead Anchor Setting Tool, 6 inch model, used to set anchors in place by spreading the head without stripping the threads, made for...

Combo Sidewalk Bolt Lead Anchors, for use with any size length 1/4-20 bolt, pass thru style. Zamac Body / Lead Core. Bolt Anchor Fastener is...

Sidewalk Bolt Power Bit, works for both Combo and Slotted Sidewalk Bolts. Beveled Spring Loaded Sheath. Bit is 4" long, made of High Strength Carbon Steel,..

Solar Thread, UV Resistant, Made by BERTHA©, 8 oz Spool, Choose Black or White, 2000 Feet each. Perfect for any type repairs on...

Spanner Wrench Set for Windows and more. You get 2 Different Size Spanner Wrenches per Quantity ordered. Made of thick 4mm Steel, 

Square to Hex Socket Adaptor Coupling, Extension Shaft, makes 1/4" Square drive tools to Hex drive.

Tapcon Anchors, Storm Guard, Carbon Steel with Ultra Shield, 2 Sizes, a High Performance Anchor for direct mount panels to Wood, Concrete,...

Tapcon Screws 1-3/4", Storm Guard, Carbon Steel with Ultra Shield, a High Performance Screw for direct mounting to Wood, Concrete,...

Tapcon Screws 2 1/4", Storm Guard, Carbon Steel with Ultra Shield, a High Performance Screw for direct mounting to Wood, Concrete,...

Tapcon Large Flange Screws 3-1/4", Storm Guard, Carbon Steel with Ultra Shield, a High Performance Screw for direct mounting to Wood, Concrete,...

D.O.T. Threaded Transformer Base with Aluminum Door, 356-T6 Alloy; ASTM B 36 

Stainless Steel Thumb Screws, 3 Sizes; 1/4-20 x 3/4" or 1", and 10-24 x 3/4", Select  total Pieces desired. Accordion Shutter Screws... for the locking pins

HPPE EN388 Level 5 Protection Touch Screen cut resistant proof gloves for Kitchen or Security, or Work use.

Universal Bunk Bracket, Aluminum, for boat Trailers, or any Super Heavy Duty use 2 1/2" x 2" x 5" long x 3/8" thick. Holes are 9/16" diameter. 1 Pair

WIFI & RF Smart Switch Circuit Breaker, 120V, Alexa/Google Compatable, work any Circuit or Appliance from your phone

Galvanized Steel Z Clips for Awnings, 1.5 x 2.5 x 1/8 thick. Choose total Pieces from 4 pieces thru 50 piece set, then Quantity 1,.. or Quantity 2 to Double the pieces set. 

Socket Power Bit Extension Driver, 3/8 x 4 inch, Pro Quality. Made in the USA.

Drive Socket for Panelmate Pro or Panelmate Plus type screws, 3/16" Hex. This Bit is what the Pro's use, made to last.

Panelmate Combo Bit, Domestic (Made in USA), this is Professional Grade made to last. For Concrete, Block,.. not wood.

Phillips Power Driver Bit, size #3 x 6 inch, or size #2 x 6", made Tough, this is what the Pro's use. Made in the USA,...

Adjustable Interlocking Shims, Horseshoe Shaped, Breakaway Style, Plastic, 50 Pieces, Perfect for Shutters, Doors, Windows, or...

Tapered Mag Driver Bit for Hurricane Screws , 1/4" Size, #8 Screw Head, Brand New, Made in USA, Heavy Duty. This item will fit in...

Wingnut Hand Driver Tool for Hurricane Storm Panels and Shutters, Brand New, fits all wingnuts from size 10-32 to 5/16" Made in USA,...

Wingnut Power Driver Bit, fits many size wingnuts, from 10-32 to 5/16" thread. Heavy Duty industrial strength metal. Shutter Tools...